Welcome to Pantum Nepal

SCAN LIKE A PRO?

 

Scan multiple pages into one PDF for Any One Series Printer

 

To Scan Multiple Pages into One PDF

 

  1. Press the “Scan” Button to enter scan status. The Default scan mode of the control Panel is Single Page.

 

  1. Press Or  Button to select and enter "Merge Scan" Mode.

 

  1. Press the “Start" Button and the Scan Process Bar Interface will pop up on the Computer.

 

Note: Single Scan/Margin >>> Single page

 

  1. After completing scanning the first page, the contents as shown below will appear on the Control panel:
  • Press the "Start" button - scan the next page
  • Press the "OK" button- end the scanning

Know More About My Printer

  1. How can | check how many pages | have printed?
  2. How do | check the amount of toner left in my cartridge?
  3. What is my serial number?

Just print the information page! We will tell you all the answers.

  • Press the “Menu” And Turn “Page Down” on the Control Panel.
  • Choose “7-Info.report” (Menu Setting 7.Info. Report) and press “OK”.
  • Select No.2 (Info. Report 2.Prt.)- “Print Info Page” and Press “OK”

 To open toner saving mode

1. Press The “Menu” Bottom To Enter The Menu Interface.

 

2. Press Direction Pad  Or  To Select

  • System Setting And Press “OK” Button

 

3. Press The Direction Pad  Or  To Select

  • “Toner Save Setting“ Option and Press OK Button

 

4. Press the Direction Pad  Or select the “Open” and Press “OK” Button, And Then The Toner Saving Mode Is On.

3 Steps To Clear Paper Jams

Please turn off the printer first.

  1. Remove The Toner Cartridge;

 

  1. Open The Upper Fuser;

Attestation: It can be very hot for long-time using

 

  1. Gently Pull the jammed paper straight out.

 

One Step Get Your Printer and Computer Connected

Convenient Driver installation

  • Option 1:- Connect with USB
  • Option2:- Connect with a Wireless Network

WAYS TO GET PANTUM DRIVER

  • Use driver CD from the box; AS
  • Download for www.pantum.com

WWW.PANTUM.COM

To clean your printer effectively

PART 1 THE OUTSIDE AND PLATEN GLASS PART

1” Turn off” the main power switch and unplug the power cord, USB cable, phone cord, and the network cable.

2. “Use” a soft rag to wipe the outside of the printer.

3. “Raise” the cover and gently wipe the platen glass with a soft cloth.

PART 2 THE SCANNING PLATFORM

1. “Raise” the scanning platform until it is locked.

2.” Remove” the laser toner cartridge along with the guides.

3. “Gently wipe” the dustproof mirror of laser scanning surface with a cotton swab or a dry and lint-free soft cloth with a little alcohol.

Note: When removing the laser toner cartridge put the cartridge in a protective bag or wrap it with thick paper to avoid direct light damaging the photosensitive drum.

PART 3 THE INSIDE PART

1. Using a dry and lint-free cloth to gently wipe the inside part as shown in the picture below.

Go to the Control Panel And Open the  Printer’s Proprieties

Choose “Layout” and got the last under the Image Orientation, in there you will see the “Effect” Button. 

Click in the “Effect” Button.

After clicking the “Effect” the new page will open, then you have to click on the "Density" Button, clicking there You will see three sub-topics:
• Light
• Normal
• Dark

And now, you have to click on the “Dark” Button.

And the Last Click on the "OK" Button.

Density:
Print density is the measurement of light reflected off of the substrate, or how dark the print appears after each press stroke. When looking at the definition of print density it is easy to see how the materials that come in direct contact with the printing surface play a crucial role in print density quality.

TO FIND YOUR SERIAL NUMBER

1. BOX

  • Serial Number (10 DIGITS) listed On the side of the Printer’s box.

 

2. PRINTER

  • Serial Number (10 DIGITS) listed Inside Part of the Printer.
  • Serial Number (10 DIGITS) listed On the back part of the Printer.

TO CANCEL A PRINTING JOB IN THE QUEUE
 

STEP 1


Go in the "Control Panel" and press "Devices and Printers", and then double-click the model of your printer.

Control Panel » Hardware and Sound » Devices and Printers
• Add a device
• Add a printer

Select the Printer That You gave the command for the printing.

STEP 2 

Right-click the printing task that you want to stop.

Example: - Printer Document View >>Document Name >> Right Click 


STEP 3 

Choose “Cancel”, and the printing job will stop.

Example: - Printer Document View >> Document Name >> Right Click >> Cancel